Guidelines to Set Up Netgear Orbi Router in AP Mode

Orbi Router in AP Mode

Want to set up your Netgear Orbi router in AP mode? In the access point mode, your Orbi device will act as a gateway for other devices to connect to. Also, setting up your Orbi as an access point will extend the existing WiFi range. Thus, if you are willing to set up your Orbi as an access point, know that you’ve made the right decision.

Now, let’s get down to the theoretical part. Mentioned in this blog post are the step-by-step guidelines that you need to follow in order to configure your device as an access point. In case you get stuck at any point during the process, feel free to reach out to our highly experienced technical experts. They’ll surely be of some assistance to you.

How to Set Up Your Netgear Orbi Router in AP Mode?

  • Connect Your Devices with a Cable

Start by setting up the hardware of your Orbi device. Once the hardware has been configured properly, create a connection between your Netgear Orbi router and modem. It is recommended that you DO NOT connect your devices wirelessly. Use an Ethernet cable to connect them instead.

Why? Well, using an Ethernet cable to connect devices is a more reliable option in comparison to the wireless one. Before you use a cable to connect your devices, make sure that it is in good condition. No cuts should be found on the cable.

  • Open Up an Internet Browser

As soon as a good connection between your Orbi router and modem has been established, switch on your laptop. Then, open a web browser of your choice. You can use Google Chrome, Mozilla Firefox, and Apple Safari as long as the web browser is updated.

Note: To avoid unwanted issues during the process of setting up Orbi router in AP mode, it is recommended that you clear the cache, cookies, junk files, and browsing history of your browser.

  • Perform Netgear Orbi Router Login

Type orbilogin.com in the address bar located in the top-left corner of your web browser. Press the Enter key and visit the Netgear Orbi login web page. Refer to the Netgear manual and fill in the default username and password of your WiFi router.

Note: To log into your Netgear Orbi device, you can also make use of the default IP address. No idea regarding what might be the default IP of your WiFi device? Get in touch with our technical experts right away!

  • Navigate to Advanced Setup

As soon as you log into your Netgear Orbi device, go to the Settings option. Then, walk through the instructions mentioned below to proceed further:

  • Click on Advanced > Advanced Setup > AP Mode.
  • The AP mode page will appear on your screen.
  • Click on the AP mode radio button and hit Enter.
  • Select one of these options: ‘Get dynamically from existing router’ or ‘Use fixed IP address’.

After choosing one of the aforementioned options, click on the Apply button and wait for the changes to get saved.

Note: During the entire process, make sure that you have a strong internet connection. Or else, you won’t be able to log into your Orbi device and configure it in AP mode. In case you’re facing internet issues, contact your Internet Service Provider (ISP) immediately.

Conclusion

Hopefully, this blog post taught you all about what is Orbi router AP mode and how to set up your WiFi device as an access point. If you still have any further doubts or queries, know that our technicians are not that far away. Feel free to contact themand get rid of the worry lines on your forehead.