Netgear Orbi is one of the best WiFi routers preferred all across the globe. They are known not just for their elegant design but also for a blazing-fast internet connection. A Netgear Orbi device is quite easy to set up but not that easy to get synced. Many users have been filing complaints regarding how they aren’t able to sync Orbi satellite with the router.
Have you been facing the same issue for quite some time now? If the answer to the question is yes, then worry not because you have come to the right place in search of an answer. Here, we’ll provide you with the steps to sync Orbi satellite to your WiFi router.
Also, you’ll learn about various troubleshooting tips that’ll help you in case you get stuck with the ‘Orbi satellite not syncing with the router’ issue. So, without wasting any more time, let’s get down to it, shall we?
Instructions to Sync Orbi Satellite with Your Home Router
Mentioned below are the steps that you need to follow in order to sync your Orbi satellite with the Orbi router manually:
- Place the Orbi satellite in the same room as that of the Orbi router.
- Connect the Netgear Orbi router to the existing modem.
- Power on both your WiFi devices and wait for the white LED light to become stable.
- Then, press the Sync button located at the back of the Orbi satellite.
- Do the same with your Netgear Orbi router.
- Give the Orbi satellite as well as the router some time to get synced.
- Within a couple of minutes, both your WiFi devices with get synced.
On the off chance, if your Orbi satellite fails to sync with the router, then either follow the troubleshooting tips mentioned below or get in touch with our experts immediately.
Troubleshooting: Can’t Sync Orbi Satellite with the WiFi Router
I. Relocate the Orbi Satellite
Start by checking the location of your Orbi satellite? It is placed at its ideal location? If the answer to the question is no, then it’s time that you relocate your satellite. Make sure that it is placed in the same area as that of your Orbi router. Also, keep it away from corners and thick concrete walls. You wouldn’t want the WiFi signals to get blocked, right?
II. Keep Transmitting Appliances at a Fair Distance
Another reason why you can’t sync Orbi satellite with the WiFi router is the existence of electronic devices and transmitting appliances. Devices like cordless phones, washing machines, treadmills, microwaves, baby monitors, Bluetooth speakers, and televisions are known to create interference in the signals of a technical device.
Therefore, ensure that your Netgear Orbi router and satellite are placed far away from such devices. Additionally, DO NOT place your Orbi satellite behind or inside a cupboard.
III. Configure the Hardware Properly
Are you that you configured the hardware of your Netgear Orbi device properly? Well, there, you found another reason why you can’t sync Orbi satellite with your home router. To get rid of this issue, here are a few points that you need to consider:
- Your Netgear Orbi router and the existing modem should be well connected.
- The power cable that you’re using should be free of cuts and breakage.
- The wall socket that you’ve plugged your device into shouldn’t be damaged.
Once you are done following these points, access the orbilogin web page and check whether the issue at hand has been resolved or not. If not, scroll down and keep reading.
IV. Give a Call to Our Highly Qualified Technicians
After all the efforts that you’ve made so far, if you still aren’t able to sync Orbi satellite with the WiFi router, then we highly recommend you to get in touch with our experts.